We grant you with high quality and low cost.
We believe that is your best choice!
Jinan jinjiate special precision gearing Co., LTD
Detailed Product Description
We can offer linear shaft with diameter 3mm~8mm, maxi-mum length up to 6000mm
Cylinder linear rail
1. When you have special requirements on the length of time, we can meet you machining requirements with different length. When you request above 6000mm, we can ant-Conner for you.
2. SFC
Material: GCr15 bearing steel
Hardness: HRC58-64 degree
Accuracy: g6
Roughness: less than 1.5um (Ram)
Hardness: 0.8-2mm layer
Straightness: 100mm less than 5um
Plating thickness of the hard Lou: Single 0.015-0.025mm
3. Main use: straight axle automatic transmission there is extensive use, such as industrial robots, automatic recorders, computers, printers secret, special cylinder rod, auto plastic wood machines and other industrial automatic machines. At the same time because of its hardness, but also extend the life of ordinary precision instruments.
4. Our company can provide you with diameter of 3mm-100mm. Maximum length up to 6000mm all linear axes. Straight shaft in the automatic transmission have widely used, such as industrial robots, automatic recording meetings, computers, precision printers, special cylinder rod, woodworking machinery, industrial automation machinery, while the product guide in the dual interface is no alternative.
5. Shaft hit the standard screw
If the load is too high or unbalanced because Reship axis deviation or other accuracy problems, axis will be losing their effectiveness. Then, choose a larger diameter shaft, the best way is to select and TBR / SBR guide rail support combined axial center line (bus) to use to fight screw axis. Screw shaft had to fight to take the standardized design and manufacturing.
6.when you are special requirements on machining, such as threading,coaxial holes drilled and tapped,radial holes drilled and tapped,reduced shaft diameter etc,we can machine for you ,and these special machines are finished after heat treat-mint and hard chromic so that ensure the precision of product. Send us your detailed sketch or blue print for prompt quota tine and action; you should be satisfied with our service.
