Size: about 12mX1.3mX1.3m, it according to customized profiles.
forming speed: 15m/min
Rolling speed: 5-8m/min
Roll station: 13 steps.
Raw Materials: 1250mm.
Thickness of Material: 0.3-0.8mm.
Roller’s material: 45# high quality steel with surface coated with hard chrome 0.05mm.
Shaft material: 45# high-quality steel.
Shaft diameter: φ75mm.
Thickness of Siding Plate: 18mm.
Ladder Step: hydraulic control, after molding then cut ladder-shape outage.
Cutting method: hydraulic control, after molding then cut it outage.
Cutting Material:Cr12Mov, hardening HRC58-62
Chain wheel: track distance 25.4; number of wheel teeth:18
Stander: welding by 350*175H steeSquare box: material Q235-A wallboard-type square box
Main engine power: 5.5KW
Working pressure of hydraulic system:16MP
Motor power of hydraulic system: 4KW
Electric controlling system: PLC system.
The machine size(L*W*H): 8500mm*1500mm*1300mm
1. The structure is simple, the outlook is artisticbecause the complete machine uses the section structure, after welding whole processing, therefore structure succinct reasonable, saves carries ability steadily, the revolution is reliable.
2. After the equipment roller wheel uses the high quality No. 45 forging steel precise manufacture, after coating the hard chromium on the surface, achieved the roller skin hardness is high, smooth, plate formation surface non-damage effect.
3. The stone roller is No. 45 steel after the quenching and retempering treatment, enhances the bearing the intensity, synthesis mechanical properties and so on degree of hardness
4. All of main primary device in electricity control system are imported from Mitsubishi Japan.
5. Uses the completely automatic cut-length-off, the fixed-length localization is precise, shape of strip from beginning to end is artistic neat.
6. Low noisy, high efficiency
7.Installation and Training Service Provided