high head piston pump
1.Discharge size: 150mm
2.Capacity: to 1008m3/h (to 280L/S)
3.Head: to 118meter

High head piston slurry pump with motor

1.  Cantilevered, horizontal, centrifugal, single stage slurry pump

2.  Widely application: They are designed for handling abrasive, high density slurries in the metallurgical, mining, coal, power plant, building material and other industrial departments etc.

3.  Long bearing life: The bearing assembly is with large diameter shaft and short overhang minimizes deflection and vibration.

4.  Shaft sleeve let Shaft life longer: A hardened, heavy-duty corrosion-resistant shaft sleeve with ‘o’ ring seals at both ends protects the shaft.

5.   Wear resistant and anti-abrasion wet parts: The wet parts can be made of hard metal (26-35% Chrome alloy Iron) or pressure molded rubber.

6.  Easily replaceable liners: Liners are bolted to the casing.

7.  Simple maintenance throat-bush: the mating face of the throat bush is tapered, so the wear is reduced and removal is simple.

8.  Easy adjustment of impeller: An impeller adjustment mechanism is provided below the bearing housing.

9.  High efficiency and high head design are also available. The liners and impellers for high-head pumps are adoptable of hard metal only.

10. Pump’s discharge angle can be revolved per 45°, so eight different angles to different using.

11.  This type of slurry pumps is installed in multistage series also

12.  Power source: three phase,50Hz or 60Hz

13.  Medium temperature should not exceed 40 degrees Celsius.

14.  Solid particles maximum density by weight in medium: gray sediment for 45%, mineral sediment for 60%.