ESD rubber mat are mainly made of anti-static(conductive) and static-dissipative materials, and synthetic rubber.
ESD Anti-static rubber Mats
Characteristics :
1) Retain equipotential between sensitive device or human bodies and mat.
2) Offer excellent resistance to oil, grease and most common solvents.
3) Useful for semiconductor, computer & electronic parts factories, electronic exchange or OA machinery rooms, and chemical laboratories.
4) Put it to good use of flooring or table tops.
5) Both of Matte finish and Glaze type are available.
6) Will not peel, chip, or curl.
Materials :
1) 2-layers mat
-Top layer : static dissipative NBR. Top layer – 10^8-9Ω/Sq
-Bottom layer : conductive NBR. Bottom layer – 10^4-5 Ω/Sq
Specification
Thickness | : 2mm, |
Width | : 600,900, 1000, 1200mm(nominal) |
Length | : 10M / roll (nominal) |
Tensile Strength (MPa) | : 27.9 |
Elongation(%) | : 295 |
Surface Resistivity (ASTM-D257) | : Top layer - 108-9 Ω/Sq |
Resistance to Group | : Less than 107 Ω/Sq |
Chemical Resistance | : Solvent, Acidic, Alkali, Oil, Aromatics |
Non Chemical Resistance | : D.O.P Ketone |
5KV decay time | : < 0.01sec. |
