1 Excellent X-ray radiolucence
2 High strength
3 Good air-permeability
4 Easy operating
5 Lightweight
Material
·Fiberglass
Specification and Size
2in KD002 5.0 cm×360cm 10Rolls/Box
3in KD003 7.5 cm×360cm 10Rolls/Box
4in KD004 10.0cm×360cm 10Rolls/Box
5in KD005 12.5cm×360cm 10Rolls/Box
6in KD006 15.0cm×360cm 10Rolls/Box
Characteristics
1 Excellent X-ray radiolucence
2 High strength
3 Good air-permeability
4 Easy operating
5 Lightweight
Storage
Be careful not to break the package.
Store KANGDA Cast at room temperature.
Damaged products by careless handing cannot be replaced.Please handle and store them carefully.
The shelf life of KANGDA Cast is 2 years from the day of production.
Operation
1. Put on the padded covering in the affected body part, and twine with the cotton paper.
2. Wear surgical gloves.
3. Before opening the package, choose the roll of proper size.
4. Immerse the roll in room temperature water for 2-3 seconds and squeeze it 2-3 times.
5. Wrap spirally, overlapping the previous layer by one-half or two-thirds the width of the roll. Just 3-4 layers provide a strong non-weight-bearing cast and 5-6 layers are typically adequate for weight-bearing cast.
6. is sufficiently cured to pervert further molding in 3-5 minutes after immersion in the water. Allow about 10 minutes for sufficient cure and let patients do not move during this time.
7.may be windowed, trimmed or removed with traditional cast saw equipment.
Precaution
Please apply the surgical rubber gloves when you operate the product.
When the resin is stuck to operator, please wipe it out with cotton swab with acetone.
Recommended Amount of Usage
Size Use
2in Children’s hands, fingers, and toes
3in Children’s wrists, ankles, and arms and legs
4in Children’s legs and ankles, adult’s hands and wrists
5in Adult’s arms and legs
6in Adult’s arms and legs