Vertical-type die spotting machinesuitable for thin-strip tension forming mold
Minimum Order: 0
Quality/Safety Certification: 0.00
Vertical-type die spotting machinesuitable for thin-strip tension forming mold
Model | NCC-100 | NCC-200 | NCC-300 | NCC-400 | ||
Largest Clamping Force (T) | 100 | 200 | 300 | 400 | ||
Larget Lifting Force (T) | 50 | 80 | 100 | 120 | ||
Rolling Angle | 180° | 180° | 180° | 180° | ||
System Pressure(Mpa) | 20 | 20 | 20 | 22 | ||
dieOpening Space (mm) | 2000 | 2500 | 2800 | 3200 | ||
Stroke of Main Oil Cylinder | 1900 | 2400 | 2600 | 3000 | ||
Size of Working Bench (mm) | 2500×1800 | 3200×2500 | 4000×2800 | 4500×3000 | ||
Bearing Capacity of Upper Working Bench (T) | 12 | 20 | 28 | 35 | ||
Bearing Capacity of Lower Working Bench (T) | 30 | 50 | 70 | 100 | ||
Rapid Lifting/Falling Velocity (mm/s) | 100 | 100 | 90 | 100 | ||
Slow Lifting/Falling Velocity (mm/s) | 20 | 20 | 20 | 20 | ||
Pressing Speed (mm/s) | 10 | 10 | 10 | 10 | ||
Jogging Speed of Sliding Table (mm/s) | 5~10 | 5~10 | 5~10 | 5~10 | ||
Moving-out Stroke of Lower Working Bench (mm) | 4000 | 5200 | 6000 | 6400 | ||
Moving-out Speed of Lower Working Bench (mm) | <50 | <50 | <50 | <50 | ||
Repeatability Precision of Lower Working Bench | <0.1 | <0.1 | <0.1 | <0.1 | ||
Distance between Lower Working Bench to the Ground (mm) | 250 | 250 | 250 | 250 | ||
External Size | Height above ground | 6300 | 7000 | 7600 | 8100 | |
Height below ground | 750 | 850 | 1000 | 1100 | ||
Floor Area | Left to right (mm) | 4500 | 5200 | 6100 | 6700 | |
Front to aft (mm) | 7600 | 8900 | 9900 | 10900 | ||
Motor Power (kw) | 30 | 45 | 55 | 75 | ||
Weight of Machine Tool (T) | 55 | 120 | 160 | 190 |