Welcome to B2BAGE
200T Vertical spotting machine/hydraulic mould spotting machine/disk type spotting machine
200T Vertical spotting machine/hydraulic mould spotting machine/disk type spotting machine

Minimum Order: 0
Quality/Safety Certification: 0.00


1.Hydraulic system adopts vibration-absorption facilities
2..high-Speed die spotting machine
3.easier to operate

Features:

 

Notes:  pls see the following picture for your information to make you better undersatnd " PRODUCT DETAILS"

 

Land for the machine: 4960*3640mm

Weight of the machin: 25T

Size of oil tank(L*W*H): 1750*900*700mm

Feuling Charge: 1000L

 

 

 

1. Small-tonnage type (below 200T) frame adopts welding type frame structure, while large-tonnage type (above 300T) frame adopts welding type and separated frame. Separated parts are connected through Green columns and screws. Frame and sliding table are processed through tempering treatment, for the advantages of no stress, large rigidity and small formation.
2. Upper and lower working benches and guide rails of pressure-plate die spotting machine are made from nodular cast iron and adopt manual scraping for surface processing, with advantages of sound flatness, high precision and small deformation.
3. Disk type die spotting machine adopts electric control permanent magnet disk, with advantages of non-magnetic cut in despite of power supply and simple magnetizing and demagnetizing operations. After completion of magnetizing, the magnetic forces will not be reduced, with advantages of strong magnetic forces, safety and power saving.
4. Complete safety facilities, safety grating, anti-falling oil cylinder, locking cylinder and safety supporting frame and other prevention facilities.
5. Hydraulic system adopts vibration-absorption facilities, to reduce hydraulic impact and ensure precision of facilities.
6. Hydraulic system is equipped with low-pressure protection facilities, to prevent damages caused by collision and insertion.
7. The system can adopt impact produced through high-speed die spotting, to obtain extremely sound impression effects of red lead.


Parameter Table of Vertical Type Die Spotting Machine:

Max close force(T)200Max lift force(T)80Mould open space(mm)1800
Working table size(mm)1800×1300Upper table bearing force(T)5lower table bearing force(T)11
Permanent magnetic force of upper magnetic chuck(T)125Permanent magnetic force of lower magnetic chuck(T)80Up/down speed(mm/s)70/80
Pressurizing speed(mm/s)<25Eject capacity(T)5Eject stroke(mm)100
Out stroke of lower working table(mm)2800Motor power(KW)15Weight of the Machine(T)25

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.