The casting & rolling line is used for comtinuously casting and rolling glossy copper rod with adimeter of 8mm.

It consists of melting furnace (shaft or radiant furances upon user’s option), holding furnace, casting machine, pinch rollers, hydraulic shearer, straightening & burring machine, stripper, rolling mill and coiler.

About the melting furnace

.Heat output: NG(natural gas) 8 00kcal/Nm3,

LPG(liquefied petro gas) 22000kcal/ kg

Gas Flow           NG 1200Nm3/h;   LPG 800kg/h

Pressure            0.12-0.2Mpa

Furnace type         shaft (vertical)

Melting rate         15-16t/h

Melting time         less than two hours

Charging method          tip cart

Loading capability         3t

Holding furnace type                              hydraulic titling

Holding furnace capacity                 8t                                                                            

Max. Titling degree of holding furnace        more than 70º

Gas consumption                 NG 50-60m3 per ton of rod, LPG:40-50kg/t rod

Linings of shaft furnace       SiC

Launders              closed type

Max. Shaft furnace burner heat output       40×104kcal/h

Max. Holding furnace burner heat output    40×104kcal/h

Lunder burner heat output                      5×104kcal/h

Pipe dim                                   NG DN100-150 / LP 80-100

Gas supply flow                         NG1200m3 / LP 800kg per hour

Casting & rolling machine

Five-wheel casting machine

Diameter of crystallizing wheel       φ1820mm

Rotating speed of crystallizing wheel  1.767-2.615 r/min

Casting speed                    9.857-14.58 m/min

Cross area of casting wheel        2500mm2

Casting motor                      5.5kw (AC. Frequency speed regulator)

Temperature of cooling water for casting  less than       35°C

Rolling Mill

Main motor                    460 Kw/DC

Final rolling speed               9.56m/s

Diameter of output rod             φ8mm

Center height of rolling           902.5mm

No. of rolling stand               12

No. of two-roller stands (first and second stand adopts high strenghthen steel casts):

No. of three-roller Y type stands      6

Nominal diameter of roller         φ255mm

Coiler

Diameter of coiler   φ 1800 mm

Motor for coiling     5.5 Kw/AC

Under the power of driving and thrusting, the rod goes into the worm wheel shaft. And then it goes into the screw swing pipe for pre-deformation, afterwards it is coiled and dropped into the trolley.

Trolley

Diameter of coiling basket     1800mm

Height of coiling basket      1500mm

Motor for basket rotation     2.2 Kw/AC

Electrical system

DC drive Siemens China, PLC control and man-machine interface.

More technical details for the entire production line to be provided when making business negotiation.