It is composed of rolling mill and its lubrication system and emulsion lubrication system.
.
3.4. Rolling mill:
3.4.1. Main machine of rolling mill
Main motor: Z-355-42, 400KW, 600rpm
Final rolling speed: Vmax=9.80m/sec.
Final rod diameter: Φ8 (Φ10, Φ12, Φ14, Φ16)
Output: approx. 12.5~17ton/h
Center height of rolling: 1535mm
Number of stands: 12 in total
2 sets with horizontal rollers
2 sets with vertical rollers
4 sets with Y-typed rollers by upper drive
4 sets with Y-typed rollers by lower drive
Nominal diameter of roller: Φ255mm
3.4.2. Feed-in device
Air cylinder CA100B75-AB (10A-5)
3.4.3. Emulsion lubrication system
Emulsion pump IS100-65-200 Q=100m3/h, H=50 15KW, 2900rpm, 2 sets (one for stand-by)
Filter GLQ-100, 1set equipped with a 1.1KW motor
3.4.4. Oil lubrication system
Gear pump 2CY-18/3.6-1, 5.5KW, 960rpm, 2 sets (one for stand-by)
Working pressure: 0.08~0.3Mpa
Filter GLQ-80, equipped with 1.1kw motor, 1 set
Oil tank: V=5m3 to be made on site
Oil temperature <45°C