Casting Line for Aluminium Profile
1.Surface treatment:Casting
2.Usage: door and window
3.MOQ:1 set
Certificate:QS
Casting Line for Aluminium Profile
A)Main usage-Non-ferrous metal(Aluminium)to be smelted.
1, Liquid aluminum capacity is for 10 T,Vaults course door, the electric lifting of furnace door, aluminum liquid discharge.
2, Furnace shell is for 8mm steel plate,The steel type of furnace wall for 12 # channels.
3, The thickness of refractories for furnace wall about 500mm,Molten pool adopted level 1 LZ -70 with high aluminum bricks,Insulation materials and high-density castable material.Above the part of molten pool use level 1 refractory bricks,
Insulating layer use diatomite heat preservation brick and siliceous aluminous fiber
Furance door is with superior , low cement crater of high strength castable
Adopting level 1 fire-proof bricks masonry arched in the top of furnace, use high strength castable.
B)Basic structure consists of ignition institutions and match the wind mechanism ,
which makes them be full burn and stable. The burner is equipped with such as the fuctions:
flameout protection, gas high (low) pressure protection, air pressure protection and alarm prompted .
The calorific value of fuel gas, pressure without any limitation, and as long as the user to be given when place the order.
This burner is suitable for positive pressure and negative pressure,
with natural gas, liquefied petroleum gas ,which is as fuel furnace
Functions
Strong firepower, stable burnning with electricity saving,convenient operation ,less failure rate
Operating mode-Automatic
Installing mode-left and right direction. customer's request
Energy consumption
Such as 10T furnace, Above 70% to be released for aluminium ingot,the rest of is for extrusion angle material.
In the condition of continuous producing
,the gas of aluminium per ton about 75~85m3
c)10T Wire rope open caisson type casting machine
Usage
The aluminium liquid to be smelted ,according to the type of alloy,casting shape and specifications.
which adopt suitable processing data,making them cast to high, medium and low-grade aluminum alloy ingot casting
Wire rope vertical bar for casting machine is without guide wire rope
Casting platform with rising and dropping adopt winch with steel wire rope to be operated,Utilizing foundry platform and pouring the weight ofaluminum liquid to descend
Casting machine with rising and dropping adopt the worm gear reducer of motor driving,Worm gear reducer driving reducers,Reducer driving coiling block combination
Adjusting the speed adopt variable frequency to adjust the speed,The adjusting speed range of casting 30~450mm/min
Digital display fluctuation walking speed, casting length, casting in place forme voice alarm, empty car lifting to be in postion for stopping security automatically
Using a single reel four wire rope type, wire rope diameterΦ16mm,Casting machine bear the maximum strength is for≥12T(high water)-Winch is with the device of manual falling
The controlling electrical equipment of winch and hydraulic system focused on one set of electrical cabinet.
