Fly ash aac block cutting machine
1.ISO9001:2008
2.high efficient
3.stedy operation
4.environmental friendly
Prosessional Cutting machine
~ Professional Cutting machine simple introduction:
AC Plant Cutting machineis one of the main equipment of the(AAC)production line.compact structure, easy operation,seldom need to repair.
The annual output of the AAC production line is over 50000 cubic meters, cutting machine is a necessary equipment which increases the efficiency and improve the product quality. Our JQF senes of cutting machine can cut the cake in one step by turning it over. Because of its advanced technology, we just need to swing the cake once . so we can rduce the damage to the cake. Due to its advantage, our cuttingmachine is well-received. After years of technical innovation, we have many different models of concrete cutting machine.
~Professional Cutting machine working principle:
Aerated concrete cutting machine works: adobe aerated concrete units with bottom plate into the turn after moving to the cutting machine to a small slide, 90-degree turn after the green body by the small slipway will move to the cutting position, the first of surrounded by the green body to the level of cutting, making vertical cuts. After cutting a small slip by the green body to flip mobile station, the green body to the opposite direction 90 degrees counter-reversal stage. The whole process is done automatically.
~Professional Cutting machine advantages:
1).the green body of lifting the center of gravity and center of gravity coincides with the semi-spreader, lifting will not make the green body to tip, that is grouped in the green body into the kettle, the steam curing car does not require any auxiliary support device
(2).cutting down through the mixing of 100% waste recycling purposes.
(3). the kettle has a semi-spreader, the product can be directly sub-stack, loading, but also to keep a car direct steam crane to enter online.
(4). the six sides of the green body to cut. Products, precision can reach GB/T11969-1997.
(5). plate production to meet the requirements of precision products up to GB15762-1995
~Professional Cutting machine technical target
Item | size | Size of the cake before cutting (mm) | Cutting cycle | Capacity (m³/year) | Cutting precision(mm) | Power (kw) | Outer size of the machine (mm) |
1. | 4M | 4050*1240*650 | 6 Minute/Block | 100,000 | Six-side cutting <±2 | 34 | 13800*4200*5600 |
2. | 4.2M | 4250*1240*650 | 6 Minute/Block | 150,000 | Six-side cutting <±2 | 34 | 13800*4950*5870 |
3. | 6M | 6050*1540*650 | 6 Minute/Block | 200,000 | Six-side cutting <±2 | 37 | 17500*4600*6000 |