OZ25 Collets made of 65Mn can be held by different shanks of MT4, NT40, BT40 respectively on milling and drilling machines.
OZ25 Collets:
OZ25 | 7PCS/SET | 6;8;10;12;16;20;25mm |
15PCS/SET | 3;4;5;6;7;8;9;10;11;12;13;16;18;20;25mm | |
1/8;3/16;1/4;5/16;3/8;7/16;1/2;9/16;5/8;11/16;3/4;13/16;7/8;15/16;1″ |
OZ25 Collets Chuck Sets:
OZ25:3-25mm(1/8″-1″); D:35.05; L:52; Taper:1:10; Weight:0.18KGS | ||||
Size of shank | Back Bar Thread | Qty. of Collets | Weight of set | Volume |
MT2 | M10×1.5P | 7PCS | 3.6KGS | 0.3 |
15PCS | 5.1 | |||
MT3 | M10×1.5P or M12×1.75P | 7PCS | 3.7 | 0.3 |
15PCS | 5.2 | |||
MT4 | M16×2.0P | 7PCS | 3.9 | 0.3 |
15PCS | 5.4 | |||
MT5 | M24×3.0P | 7PCS | 4.7 | 0.5 |
15PCS | 6.0 | |||
R8 | 1/16″-20 | 7PCS | 3.7 | 0.3 |
15PCS | 5.2 | |||
NT30 | M10×1.5P or M12×1.75P | 7PCS | 4.0 | 0.3 |
15PCS | 5.5 | |||
NT40 | M16×2.0P | 7PCS | 6.5 | 0.3 |
15PCS | 8.5 | |||
NT50 | M24×3.0P | 7PCS | 3.7 | 0.5 |
15PCS | 5.2 | |||
BT40-100L | M16×2.0P | 7PCS | 4.4 | 0.4 |
15PCS | 5.9 | |||
BT50-80L/150L | M24×3.0P | 7PCS | 7.5 | 0.6 |
15PCS | 9.5 | |||
