With rotating straightener and high-speed hydraulic cutter for straightening and cutting rebars.
With rotating straightener and high-speed hydraulic cutter for straightening and cutting smooth and ribbed, hot and rolled structural wires.
Technical characteristics:
Pulling speed is adjustable (two speed or steplessly adjustable, depend on the model), Max. pulling speed120mm/min.
The wire length to be cut is manually set and measured using a release device in the extension.
High-speed hydraulic cutting system. In the cutting mod, the advice wheels are relieved from pressure.
Operating console with programmer, display and piece counter. After run-down of the pre-programmed rod piece numbers, the machine is automatically brought to a standstill.
Safety switch-off device.
Technical data | GT 12 | GT 12A | GT 14 |
Wire diameter | 5~12mm | 5~12mm | 8~14mm |
Cutting length | 800~12000mm | 800~12000mm | 800~12000mm |
Pulling speed | 80, 120m/min | 0~120m/min | 0~180m/min |
Accuracy of cutting length | ±3mm | ±3mm | ±3mm |
Capacity of pay-off | ~2 T | ~2 T | ~3 T |
Rated power | 27.5kw | 27.5kw | 55kw |
Machine size (l×w×h) | ~20×1.5×1.5m | ~20×1.5×1.5m | ~25×2×1.7m |
Total weight | ~4T | ~4T | ~7T |
The technical data specified below refer to standard welding lines which, however, can be adapted to our customersspecific requirements.
