WIM MIG Welding Machine
Mosfet control/ Single phase Inverter CO2/MIG welding machine/ Welds steel, stainless steel, aluminium
WIM brand MIG Welding Machine (Model:IM200)
FEATURES
1. Long welds can be made without starts and stops
2. Minimal post weld cleaning is required
3. Reductions of smoke and fumes
4. Superior quality welds
5. Free of spatter and Low distortion
6.Easy to operate,convenient,high arc striking success rate
7.It can carry out continuous welding and disconnected welding,and continuously provide wire feeding wihtout interruption
8.Litter welding spatter,deep welding pool,stable welding,good welding surface,good heat resistance and crack resistance,small distortion when heated.
9.Be applicable for low carbon steel,high strength steel,alloy steel,soft steel etc.Be able to match various wires.
10. Service:1 year warrant,Engnieers analyze and solve problem
| TECHNICAL CHARACTERISTICS | IM200 |
| Input Voltage | Single Phase 220-240V |
| Rated Input Current | 29A |
| Idle Voltage | 43V |
| Output Current Adjustment | 40~200A |
| Rated Output Voltage | 24V |
| Rated Duty Cycle | 60 |
| Power Capacity | 6.4KVA |
| Power Factory | 0.93 |
| Efficiency | 85 |
| Wire Feeder | Built-in |
| Post Flow Time | 1 S |
| Coil Diameter | 280mm |
| Wier Diameter(MM) | 0.8/1.0 |
| Weight | 19.4KG |
| Dimension(MM) | 500*290*460 |
| Applicable Board Thickness | Above 0.8mm |
| Insulation Class | B |
| Enclosure Protection Degree | IP21S |
STANDARD ACCESSORIES
MIG Torch Co2 Gas Flowmeter Regulator
PACKAG & STOCK
CERTIFICATES
