IGBT inverter technology,current-model control,reliable quality, stable performance;
Closed circuit feedback,

MAG250(B12) IGBT welding inverter

 Feathers:MIG(MAG/CO2)
IGBT inverter technology,current-model control,reliable quality, stable performance;
Closed circuit feedback, constant voltage output, fits for wide voltage range (±15%);
Under the control electronic reactor, stable welding arc, little splattering, deep welding penetration and good welding bead;
Slow wire feeding during arc startingm,removing the tip ball after welding enables rasy arc-starting;
Suitable for workpiece with a thinckness of more than 0.8mm;
Small size, light weight, easy operation, economical and practical;
Stable welding when at the lowest current 30A when using welding wire with a diameter of 0.6 mm, and can be widely used in Automobiles, steel doors and Windows, furniture and so on;
Save cost, replace welder with taps;
Waveform control technology, inductance adjustment function, according to adjust the size of welding technology requirements, Deep welding penetration, reduce the splash and shaping more beautiful.

Parameters:
Model Item: MIG-250(B12)
Input Voltage: 3-phase AC380V±15%
Output Current range(A): 50~250(A)
Output Voltage Adjustable Range(V) : 15~29V
No-load Voltage(V): 54±5V
Duty Cycle(%): 60%
Efficiency(%): 85%
Power factor(cos¢): 0.93
Protection Class of Case : IP21
Insulation Class : F
Wire Feed Speed (m/min): 2.5~16
Overall Dimension (mm): 510×273×440
Gross Weight(Kg): 26

Accessories:
1 pc 3m MB-15 MIG torch,
1 set of 3m 25mm2 earth cable +clamp+KDP-50
1 set of CO2 regulator