Carbide tools
Grade:YL10.2,YG6X etc
Pressed by extrusion
Sintered by HIP
H6 grounded, with chamfer
Grades for carbide tools:
Grade | Density g/cm3 | T.R.S Mpa | Hardness HRA | Grain Size µm |
Performance&Application | Equivalent to ISO |
YG6X |
14.95 |
2600 |
92.0 |
1.0 | For making all kinds of carbide rotary cutting tools which are used in cast iron, hot resistant alloy steel, non-ferrous metal and nonmetal. At the same time it can be used for wear resistant parts. |
K10 |
YG8 |
14.70 |
2800 |
90.0 |
1.2 | For making carbide wear resistant parts, rods and molds, meanwhile it can be used for semifinishing and finishing cutting tool at low speed for cast iron, nonferrous metal, nonmetal material. |
K20-K30 |
YG10X |
14.65 |
3500 |
91.5 |
0.8 | For making all kinds of carbide rotary tools and PCB micro drill.It can be widely used in steel, cast iron, stainless steel, hot resistant steel, Ni base and Titanium alloy. Have a good comprehensive properties and stable. It is the first choice for twist drill and end mill. |
K20-K30 |
YL10.2 |
14.50 |
4000 |
92 |
0.6 | It is suitable for indexable tool with submicro gain size with wide application. Used for processing of stainless steel, hot resistance steel, Cr, Ti, Ni alloy, synthetic material, non metal material , alloy steel even woods. |
K20-K30 |
Specifications:
Diameter: D3-40 mm Length: 300 310 and 330 mm.
We can also cut to required lengths.
H6 ground available.
Tolerance: D3-8 mm +0.2~+0.3 mm D10-25 mm: +0.4~+0.6 mm
Package: wraped in craft foam and then in box, 25 kg/carton
Carton size: 360*250*70 mm or 370*210*140 mm