125 mm three jaw chuck
13 mm drill chuck with taper shank
Dead centers MT3 and MT2
Gear set
Mill table
Specifications
Cutting (Lathe)
Swing over bed--250 mm
Distance between centers Model 400--400 mm
Model 550--550 mm
Hole through spindle--20 mm
Spindle taper--MT3
Tailstock taper--MT2
Spindle speed (6 steps)--125-2000 rpm
Compound travel--75 mm
Cross slide travel--110 mm
Motor output power--550 W
Thread range Metric version--0.4-3.0 mm (12 threads pitches)
Imperial version--10-44 TPI (8 threads pitches)
Weight (Net/Gross) Model 400--125/160 kg
Model 550--145/180 kg
Packing Size (LxWxH) Model 400--1040x640x570 mm
Model 550--1180x640x570 mm
Drilling & Milling
Drilling capacity--13 mm
End milling capacity--16 mm
Face milling capacity--30 mm
Spindle taper--MT3 or R8
Spindle speed Low range--100-1100 rpm+/-10%
High range--100-2500 rpm+/-10%
Headstock travel--180 mm
Spindle to worktable--245 mm
Head tilt--25'L, 45'R
Motor output power--350 W
Weight (Net/Gross)--32/47 kg
Packing size--770x412x550 mm
Standard Attachment
125 mm three jaw chuck
13 mm drill chuck with taper shank
Dead centers MT3 and MT2
Gear set
Mill table
MILL TABLE
IT'S MILLING NOW.
M6=C6 +
M6B=C6B +
SM6=SC6 +
MILL ATTACHMENT (M6MA)