Energy saving ball mill
1.Works reliably
2.Grind various mine into fine powder
3.Durable and energy saving
Energy Saving Ball mill
Energy saving Ball mill is the key milling equipment after materials has been crushed. It is widely used in Cement, silicate, new construction material, refractory material, ferrous metal and non-ferrous Metal as well as ceramics. It is widely applied to grind ores in dry or wet process. Working principle: the ball mill is horizontal cylindrical rotation device, driven by brim gearwheel. There are two
Chambers and grid. Material goes into the first chamber through the feeding inlet. Inside the First chamber, there are stage liners and ripple liners as well as steel balls. The shell rotates So as to generate electricity, and this force brings ball to a certain height and then balls drop Down by gravity, the impact is the grinding force to the material. After the primary grinding, Materials go into the second chamber through segregate screen. In the second chamber, there are Flat liners and steel ball, after the secondary material is discharged from the discharging board thus the grinding process is finished.
Advantages:
1.Works reliably
2.Grind various mine into fine powder
3.Durable and energy saving
Specifications:
Model | Shell rotation speed(r/min) | Ball load(t) | Feeding size(mm) | Discharging size(mm) | Capacity | Motor power(kw) |
(t/h) | ||||||
Ø900*1800 | 36-38 | 1.5 | <=20 | 0.075-0.89 | 0.65-2 | 18.5 |
Ø900*3000 | 36 | 2.7 | <=20 | 0.075-0.89 | 1.1-3.5 | 22 |
Ø1200*2400 | 36 | 3 | <=25 | 0.075-0.6 | 1.5-4.8 | 30 |
Ø1200*4500 | 32.4 | 5 | <=25 | 0.074-0.4 | 1.6-5.8 | 55 |
Ø1500*3000 | 29.7 | 7.5 | <=25 | 0.074-0.4 | 2-5 | 75 |
Ø1500*4500 | 27 | 11 | <=25 | 0.074-0.4 | 3-6 | 110 |
Ø1500*5700 | 28 | 12 | <=25 | 0.074-0.4 | 3.5-6 | 130 |
Ø1830*3000 | 25.4 | 11 | <=25 | 0.074-0.4 | 4-10 | 130 |
Ø1830*4500 | 25.4 | 15 | <=25 | 0.074-0.4 | 4.5-12 | 155 |
Ø1830*6400 | 24.1 | 21 | <=25 | 0.074-0.4 | 6.5-15 | 210 |
Ø1830*7000 | 24.1 | 23 | <=25 | 0.074-0.4 | 7.5-17 | 245 |
Ø2100*3000 | 23.7 | 15 | <=25 | 0.074-0.4 | 6.5-36 | 155 |
Ø2100*7000 | 23.7 | 26 | <=25 | 0.074-0.4 | 8-48 | 280 |
Ø2200*4500 | 21.5 | 27 | <=25 | 0.074-0.4 | 9-45 | 280 |
Ø2200*6500 | 21.7 | 35 | <=25 | 0.074-0.4 | 14-26 | 380 |
Ø2200*7500 | 21.7 | 35 | <=25 | 0.074-0.4 | 15-30 | 380 |
Ø2400*4500 | 21 | 30 | <=25 | 0.074-0.4 | 8.5-60 | 320 |
Ø2700*4000 | 20.7 | 40 | <=25 | 0.074-0.4 | 12-80 | 400 |
Ø2700*4500 | 20.7 | 48 | <=25 | 0.074-0.4 | 12-90 | 430 |
Ø3200*4500 | 18 | 65 | <=25 | 0.074-0.4 | ----- | 800 |