mineral milling machine
1.low consumption
2.high capacity
3.no pollution
4.low cost

mineral milling machine

Working Principle of grinding machine / mineral milling machine:

In the mainframe of High Pressure Suspension Mill, there are strong springs with pressure as high as1000-1500 kg equipped on the roller suspender. When High Pressure Suspension Mill works, the roller rotates around the principal axis, and clings to ring under the effect of the strong spring and eccentricity. Its press is 1.2 times of Raymond mill under the same press condition, so the production is largely increased. When the materials are sent into the grinding chamber, they are brought to the space between the roller and ring and get grinded. Then the powder grinded will be blown into separator. The fine powder after departed with the air is discharged through the outlet as final product. The large-sized powder falls back for regrinding. The air will be back to the blower for repetition of the above process. The left air wil come to thel bag filter to get cleaned. When the wear and tear between roller and the ring reaches certain degree, adjust the length of the strong spring,, so to keep the invariable pressure between the roller and the ring, to make sure the stable production and the fineness.

 Characteristics of grinding machine / mineral milling machine

1) 0.613mm (30mesh) 0.033mm (425mesh). Some can reach the fineness of 0.013mm (1000 mesh).
2) High Pressure Suspension Mill meets the requirement of national dust-dump standard.
3)The separator can be adjusted very easily.
4) The multi-class seals are adopted to keep the grinding equipment tightly closed.

Technical data of grinding machine / mineral milling machine:

Notice: Any change of High Pressure Suspension Mill technical data shall not be advised additionally.