mineral processing spiral classifier
1 high capacity,low power cost
2 low wear-parts consumption,long life
3simple structure
FG mineral processing spiral classifier
(1) Application:
FG spiral classifier is suitable for fine sand’s classification, washing. Overflow place can be change in wide groove if need.
(2) Working principle:
FG spiral classifier’s overflow weir position is higher than the center of spiral shaft bearing bottom, but below the top of overflow spiral, which has some precipitation area, therefore, this machine is suitable for washing rough sand.
(3) Features and Benefits:
1 simple structure, convenient to repair
2 high processing capacity and low power consumption
3 low wear-parts consumption, low cost
(4) Technical Date:
Model | Screw Diameter(mm) | Screw Speeding(r/min) | Tub Size(L*W)(mm) | Tub Slope(°) | Overflow Weir Height(mm) | Capacity of overflow(t/24h) | Overall Dimensions(L*W*H)(mm) | Weight(t) | Motor Power(kw) |
FG-5 | 500 | 8-12.5 | 4500*1112 | 14-18.5 | 521 | 32 | 5480*940*1274 | 1.6 | 1.1 |
FG-7.5 | 750 | 6-10 | 5500*1112 | 14-18.5 | 521 | 65 | 6300*1250*1780 | 2.7 | 3 |
FG-10 | 1000 | 1.6-7.5 | 6500*1112 | 14-18.5 | 521 | 85 | 7891*1570*2194 | 4.169 | 5.5 |
FG-12 | 1000 | 5,6,7 | 6500*1372 | 14-18.5 | 290 | 155 | 8180*1570*3130 | 8.54 | 1.5+5.5 |
2FG-12 | 1200 | 5,6,7 | 6500*2600 | 14-18.5 | 400 | 310 | 8230*2787*3110 | 15.84 | 1.5*2+5.5*2 |
FG-15 | 1500 | 2.5,4,6 | 8300*1664 | 14-18.5 | 500 | 230 | 10199*1976*3905 | 12.54 | 1.5+7.5*2 |
2FG-15 | 1500 | 2.5,4,6 | 8265*3200 | 14-18.5 | 500 | 470 | 10410*3392*4070 | 21.11 | 2.2*2+7.5 |
FG-20 | 2000 | 3.6,5.5 | 8400*2200 | 14-18.5 | 700 | 400 | 10788*2524*4486 | 20.45 | 4*2+11 |
2FG-20 | 2000 | 3.6,5.5 | 8400*2200 | 14-18.5 | 700 | 400 | 10788*2524*4486 | 20.45 | 11 |
FG-24 | 2400 | 3.67 | 9130*5100 | 14-18.5 | 660 | 1160 | 12710*5430*5690 | 45.87 | 2.2*2+15 |
2FG-24 | 3000 | 3.2 | 12500*4300 | 14-18.5 | 400-850 | 1785 | 16020*6640*6350 | 73.3 | 4*2+45*2 |