polymer cement waterproof coating
1,high water impermeability
2,certificate:ISO9001:2008

polymer cement waterproof coatingProduct short introduction:H800 waterproof mortar is a cement-based polymer modified waterproof material. It can provide a rigid waterproofing barrier for the wall and ground, effectively prevent water infiltration to the building structure layer, to the effect of water impermeabilityApplication range:It can be widely used in the interior and exterior walls and floor.Construction points:1,the base surface must be dense,clean,without loose or hollowing ,no oil and other dirts.2,put clean water into barrel,add waterproof powder mortar.use agitator to strir it until thick paste ,put it aside for 5 minutes, stirt it once again and can be used .Don’t add water when strir the second time.The mixed mortar must be used up within 2 hours,the remaining out-of-date mortar can not be used.

product	Construction methods	proportion
Wall waterproof mortar	Spatula construct	Powder:water:5:1
	brush.roller construct	Powder:water=5:1.5
ground waterproof mortar	spatula	Powder:water=5:1

3,use steel spatula or brush roller to smear the adjusted mortar on wall or ground ,wall paintcoat thickness should not over 1mm every time , can paint the second layer in 2 hours..floor paintcoat thickness should not be over 5mm every time.paint the second layer after 6 hours.4,after 24 hours maintenance , can do the follow-up constructionTechnical performance:

project	Floor waterproof mortar	Wall waterproof mortar
appearance	Even powder	Even powder
water absorption(28d)	<5%	<3%
Compression resistance(28d)	≥25MPa	≥30MPa

Notes:1.Waterproof mortar can not be used on non-absorbent surface(such as: metal), and easy-to-vibration surface(such as: metal frame partition) 
2.this product should do the construction between5°C~35°C3.Do not do the construction outdoors in the rainy dayDosage reference:Package and storage: