Elastomeric Water Resistant Material for house Decoration
1.Environmentally
2.Excellent adhesive properties
3.Easy to use
Elastomeric water resistant material
Main Features:
1.It is environment-friendly coating without any organic solvent.
2.It is miscible and easy to use. It can be used to directly paint the surface of concrete.
3.Cold application is easy to operate. It can be applied on either wet or dry base, which shortens period of construction.
4.Excellent adhesive properties make the adhesion firm and lasting.
Scope of Application:
1. Applicable to waterproof works of works of roofing, external walls, basements,balconies,kitchens and lavatories, regardless of new or old.
2.Suitable for waterproof and anti-seepage works of basements, water pools, etc.
Performance Standard:JC/T984-2005
Technical Indexes:
Construction Points:
1.Base treatment:before construction, Base must be clean , firm,leveled,and dry without ponding water or contaminants like dust and oil stain.
2.Dosing: pour Liquid material into a clean agitation vat then slowly add and mix powder material into it as per proportion: Liquid material /powder material=1/4. Make the mixture into paste without particles or Sediment by mixing them for no less than 5 minutes .
3.Treatment of local strengthened storey : in accordance with the design,notch groove should be filled with sealing material. Internal and external corners and pipes should be painted more times . If necessary, additional layer of non-woven fabric or fiberglass mesh fabric can be installed.
4.Application of Waterproof Mortar for large-area: it is good to coat mortar two times with 2 hours in between. Coating thickness of every time should be 0.5mm~0.8mm. During construction, the coating is supposed to be stirred from time to time in case of precipitation .
Points for Attention:
1. Covering layers can not be installed before the waterproof coating layer become dry completely.
2. Waterproof Coating can not be painted before the base is firm enough.
3.Due to that coating is alkaline which is irritant to eyes. Please clean out eyes with clean water if they are splashed with the coating.
Suggested Dosage
For Thickness of Coating Film 1.0mm, quantity of coating required is about 1.7kg/m2 .
Transportation and Storage
1.Elastomeric water resistant material is not flammable and explosive, it can be transported as general cargo. During transportation, keep it from sunshine, freezing, rain, compression and collision. And keep the packing in perfect condition.
2.In storage, keep it ventilation and drying and from direct sunlight. storage temperature is 5°C~35°C and quality guarantee period one year.
Certification
ISO9001:2000, ISO9001:2008, ISO14001:2004
