Driving four 2.5A stepper motor simultaneously;
With 5-axis expansion
Support the choice of four segments:1,1 / 2,1 / 4,1 / 16

 CNC 4 Axis Stepper Driver TOSHIBA TB6560AHQ 2.5A With 5 Axis expansion Supports Mach3

#UC153

Brief performance of CNC 4 Axis stepper driver:

We have accumulated many years of design experience in 4-axis engraving machine drive. And developed this type of TB6560T3V1.In addition to its main features a little bit above 6560, it also has:

1, Driving four 2.5A stepper motor simultaneously,With 5-axis expansion, if you need to extend it;
2, Isolated completely high-speed DCDC optocouplers and protect your PC;
3, Spindle relay output, if you use the mach3 to control spindle start and stop;
4, Semi-flow control ,when the motor stop, current is reduced to the minimum stop effectively;
5, The interface with the fans, you can add any fans;
6, With 4-way 0.8-3.5A (peak) adjustable current, rated output two-phase bipolar stepper motor driver;
7, Interface with Standard parallel port , support MACH2, KCAM4 series software;
8, Limit interface with 4-ways, Plug connector designed fby connecting limit switches as you like;
9, Support four running mode,such as mixture,fast,low,normal mode;
10, Support the choice of four segments - 1,1 / 2,1 / 4,1 / 16;
11, Stability,and small heat,24-36V single power supply input with switching power chip supply 5V power .

GENERAL DIAGRAM of 4 Axis Stepper driver: