Welcome to B2BAGE
Stepper Driver Controller 4 Axis TA8435H 1 - 1/8 microstep setting Chip for CNC machine #OT029
Stepper Driver Controller 4 Axis TA8435H 1 - 1/8 microstep setting Chip for CNC machine #OT029

Minimum Order: 0
Quality/Safety Certification: 0.00


Toshiba TA8435H chip - maximum 2.5A drive current !
1 - 1/8 microstep setting Chip ;
555 adapts the SOP( SURFACE MOUNT)

Stepper Driver Controller 4 Axis TA8435H 1 - 1/8 microstep setting Chip for CNC machine

sku:OT029

 

Important Note:
Only simple English Manual comes with this driver board, so you should know electronics if you want to purchase it, thank you !

Features:

  1 - 1/8 microstep setting   Attention:Please connect the power supply to the power switch of 12-24 V, 5A
* Also we have suitable power supply for selling, please feel free to contact us if you have any demands ! The power output of 12 V shall be applied to the radiator fan of 12V. The interface of driver shall be connected with 2-phase, 4/6 wires stepper motor within 2A current This board can work with both unipolar and bipolarstepper motors The spindle motor is controlled by Parallel Interface. The voltage of the spindle motor must comply with the scope of the supply voltage. Support most parallel softwares KCAM4, MACH3 etc. Power supply: 12V-24V DC, 5A Output current: peak value 2.5A per phase (2A recommended) Resolution setup: full step, 1/2, 1/4, 1/8 Dimension: 18(L) x 13(W) x 3.6(H) cm Net weight: 375g

 

Package included:

1 x 4 Axis Driver Board 1 x Cable Connector 1 x Software CD (Mach3 + English User Manual)

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.