Servo motor drive
1)High precision
2)10000pulse/turn
3)Speed/position/control
4)Alarming,monitor function
power source |
| Single phase AC220V | input strong current | Three phase AC220V | |
suitable environment | temprature | operating between 0 to55C | |||
humidity | below 90% RH no dewing | ||||
vibration | Below 0.5G(4.9m/s2) no continue running | ||||
control mode | position control speed control inner control | ||||
regenerative braking | in set | ||||
characteristic | speed frequency response | 500HZ | |||
speed undulation rate |
| ||||
Velocity modulation ratio | 1:5000 | ||||
Input pulse frequency | 0-500KHZ | ||||
Input control | servo EN , Alarm Clr , deviation counter reset , instruction pulse prohibit, CCW driver prohibit , CW driver prohibit, the second electrical gear ratio | ||||
output control | Servo ready output, Servo alarming output,lacation ready output, speed arrival output. | ||||
Position control | input way | Two-phase A/B orthogonality pulse,pulse+direction,CCW/CWpluse | |||
electric gear ratio | 1-32767 | ||||
feedback pulse | Highest 10000 pulse/revolution | ||||
acceleration/deceleration function | Preference 1-10000ms | ||||
surveillance function | rotating speed , introduction pulse accumulate ,motor torque , motor current, rotor's location, introduction, pulse frequency, operating statue , input and output's terminal signal so on | ||||
Protection function | main power source being over press, owes press, over current, overload, unusual braking,unusual Encoder and so on. | ||||
operation | six LED digital tubes four keypads | ||||
suitable the load inertia | less than electrical machinery inertia five times |