stepper motor driver:
1.current: 1-4.2A
2.voltage:18-50v
3.passed CCC

Stepper motor driver:

Special point:

Dual polarity constant current chopped driver

Flexible output current Settings

The biggest 128 subdivision set, and do not affect its output torque.

Alarm signal light output coupling isolation, the convenient user monitoring.

Over-voltage, owe pressure, flow, short circuit, high temperature alarm protection

Low speed motor no creeping phenomenon, the noise is small, no resonance area.

General positioning hole size and is convenient for the user to install

Electrical properties (environment temperature Tj = 25 º C) :

The input power 18 ~ 50 V dc power supply,

Capacity: no less than 200 VA.

Output current: 1.0 ~ 4.2 A, 8 files can be adjusted

Impulse response frequency: 200 KHZ

Insulation resistance: normal temperature > 500 M Ω atmospheric pressure.

Insulation intensity: under the conditions of the 500 V/minutes.

Environmental requirements:

Cooling way: natural cooling.

Application: avoid dust, oil mist and corrosive gas.

Using temperature: 0 º C ~ + 50 º C.

Humidity: < 80% RH, no condensation, not frost.

Seismic dynamic: the biggest not more than 5.7 m/s2..

The deposit:-20 º C ~ + 125 DHS C, avoid dust,

It is best to use the original packing box