Material: 100% Asbestos Free
Model: C70
Motorbike Type: C70/CD70/JH70
Material: 100% Asbestos Free Facing Hardness: 4.5 (kn/cm3)
Model: C70
Welding Strength: 100
Bonding Strength: 90%
(a) Casting Process:
Use The high quality ADC12 Aluminum alloy with the 125T large-tommage casting.
Casting internal quality is good, the section organization grain purposely,
Not have stomatal resistance to high pressure, and enssure the rush would not
appear partial brake and fracture phenomena.
(b) Appearance Treatment
First use the the metal detergent cleaning, then reoccupy piating, and finally to
prevent oxidation process, It's can put in salt spray for testing one month.
(c) Brake Piece
The brake piece make from the asbestos friction materials--protestion the environmental
Standard: Euro 3
Useful Life: 30,000 Million Kilometers, no Noise.
(d) Brake Shoe Assembly
The glue from Japan, its temperature can achieve 300°c, shoe block bonding area: 98%
Shear Strength: 4.3MPa.
(e) Refurbished external Circular
Adopt diamond sand round to reduce the displancement of the ciscumferential deviation,
make the brake pieces interface can achieve 90%, braking very good.
Product Category | Brake Piece | Model | Motorbike brake shoe |
Model& Item No. | C70CDI | Friction | 0.40 |
Serial No. | Test Item | Unit | Standard | Assay |
1 | Friction(μ) | — | - | Temperature Rise | Temperature Reduction |
100°c | — | 0.25~0.65 | 0.36 | 0.36 | |
150°c | — | 0.25~0.70 | 0.366 | 0.358 | |
200°c | — | 0.25~0.70 | 0.36 | 0.36 | |
250°c | — | 0.20~0.70 | 0.359 | 0.358 | |
300°c | — | 0.15~0.70 | 0.357 |
2 | Wearrate(ν) | 10¯7 Cm3 /Nm | — | — |
100°c | ″ | ≤0.50 | 0.11 | |
150°c | ″ | ≤ 0.70 | 0.15 | |
200°c | ″ | ≤1.00 | 0.20 | |
250°c | ″ | ≤ 1.50 | 0.26 | |
300°c | ″ | ≤3.00 | 0.30 |