Plastic injection mould temperature controller
1.SV/PV
2.Input:J,K,E
3.Compatible with YUDO,Athena etc.
Plastic injection mould temperature controller
Features
Dual lines LED display, Easy operation
Unit display
Auto/Manual/Standby function
PID auto temperature control
Selectable two thermocouple types (J or K)
Selectable two temperature scales (°Cor°F)
Selectable two trigger output modes (Zero cross or phase angle)
Multi diagnostic & alarm function
Multi self-protect and equipment-protect function
Selectable two start modes (Soft-start or Full-speed)
3-levels parameters, use lock to keep high level parameters safe
Recover parameters default easily
Calibration function
Specifications
Supply Voltage | AC85V~250V,50/60Hz, | Consumed Power | <2.5W |
Temperature Control Type | PID Control/Manual | Control Output Type | triac(PWM mode); triac(SSR mode) |
Temperature Sensor Type | Thermocouple J, K | Temperature Measurement Range | 0°C~500°C(0°F~900°F) |
Temperature Measurement Accuracy | ±0.25%F.S | Temperature Setting Range | 0°C~450°C(0°F~842°F) |
Temperature Control Accuracy | ±0.25%F.S | Output Load Capacity | 20A, 50W~2200W 100W~4400W |
Operating Temperature | 0°C~55°C(0°F~122°F) | ||
Storage Temperature | -20°C~70°C(-4°F~158°F) | Power Switch type | HRTC-A: Soft-touch Key HRTC-B: Rocker Switch |
Operating Humidity | 10~80%RH (no condensation) |