1.Digital Multimeter Process Calibrator FLUKE 787.
2.Multimeter + Calibrator
3.Source Output
4.Analog Output
5.Loop Power
Similar to FLUKE 787 Multifunction Multimeter Digital Process Calibrator with HART protocol via RS-232.
• Clear LCD display with backlight; 4,000 counts (30,000 counts for dc current)
• With HART (Measurement, process parameters, device configuration, calibration, access diagnostic information via HART protocol)
• 1000V overload protection on V,Ohms and Frequency.
• 25% Manual Step plus Auto Step and Auto Ramp on mA output.
• Precision 1000V, 400 mA digital multimeter
• Measure AC and DC Volts & Current, Resistance and Frequency
• Diode test and continuity beeper
• 0.1% DC voltage accuracy
• 0.05% DC current accuracy, 1uA resolution
• DC current source/loop calibrator
• Simultaneous mA and % of scale readout
• True RMS AC voltage measurement to 1 kHz
• Frequency measurement to 20 kHz
• DC current source/loop calibrator
• Min/Max/Average/TouchHold/Relative modes
• Power: Ni – MH rechargeable batteries
• Operate Temperature: 0°C~40°C
• Storage Temperature: -10°C~50°C (relative humidity <=80%)
• Demension: 200*100*40mm
• Weight: 600g(including battery)
-------------------------------------------------------------------------------------------------------------------------
Technical Specification:
Measuring Function.
-------------------------------------------------------------------------------------------------------------------------
Factory Tour:
----------------------------------------------------------------------------------
Accessories:
· A Set of Test Lead Wires
· Charger
· Instruction
-----------------------------------------------------------------------------------
Warranty: one year
----------------------------------------------------------------------------------
