1.fiber transceiver
2.10/100M SM dual fiebr
3.Distance:0-20km
4.wavelength:1310nm

SM dual fiber 10/100M Fiber transceiver is a kind of quick enthernet Media Converter with the function of photo electricity switch over between 10BASE-TX or 100BASE-TX and 100BASE-FX. It can extend the conventional 10M Ethernet or 100M Quick Ethernet to 120KM via the quick Ethernet Fiber-optical Line. 

Product Description
1.Supports full or half duplex network communication, and with auto-negotiation capability;

2.VLAN support the transmission of long packets, you can switch the agreement and support of products            

3.matching IEEE802.1Q use;

4.Link remote support LINK LOSS notice warning function;

5.10Mbps and 100Mbps auto-adapt to the environment, easy network upgrade;

6.Straight-through or crossover RJ45 ports support automatic recognition (AUTO-MDIX);

7.With broadcast storm protection, balanced flow, isolate the conflict and error detection functions;

8.EMI standards comply with FCC Part15 Class A and CE Mark safety regulations;

9.High-quality laser devices have good optical properties, electrical properties and temperature stability;

10.MTBF more than 7 million hours, consistent with carrier-class operating standards;

11.Built-AC220V, DC-48V and 5V external power supply to meet the needs of different users;

12.Optional multimode, single mode dual fiber, single mode single fiber and transmission distance.

Technical parameters

Protocol: IEEE802.3 IEEE802.3U

                IEEE802.1d IEEE802.1Q

Interface: RJ45    SC , ST or FC
Indicator

POW: Power Status LED (light: Power Good)

10/100: Rate Indicator
(light: fiber optic transceivers work in the 100M; not light: fiber optic transceivers work in the 10M)
TRX: RJ45 network port indicator
(Always: twisted-pair link connected, no data is; flash: twisted-pair link connectivity, data transmission)
TPL: Power port Full / half-duplex signal indicator
(lit: network port to full duplex mode; Off: half duplex mode Ethernet port)
FPL: port signal indicator light
(light: optical ports detected input optical signal; not light: no light reception optical interface)
FRX: port status indicator light
(light: fiber link connected, no data transmission; flash: fiber link connectivity, data transmission)
Power Supply: Inner power supply: AC220V; DC-48V
                         External Power: 5V; 1A
Environment: Operating temperature: 0 ~ 50 °C
                       Storage temperature: -40 ~ 70 °C
                       Humidity: 5% ~ 90% non-condensing

Emission/Safety :FCC Class A, CE

Ordering  information