1.24 10M/100M/1000M RJ-45 ports (auto MDI/MDIX) with 2 combo SFP ports
2.VLAN,QoS,Broadcast Storm Control
3.48Gps
Gigabit fiber switch
SG 2124F provides a user-friendly Web interface, MAC table management, switch discover and port management to enhance network security. Besides, it also supports VLAN and broadcast storm control. With excellent expansibility, SG 2124 is the preferred equipment for Internet cafes, enterprises, communities and schools to build gigabit backbone networks.
Features
Port Attribute
Each port supports auto MDI/MDIX
Each port supports Auto-Negotiation
Each port supports 10M full/half duplex, 100M full/half duplex and 1000M full duplex
Each port supports no-block wire-speed switching
Port Flow Control
Support back pressure flow control in half duplex
Support IEEE 802.3x flow control in full duplex
Port Configuration
Support port configuration (enable or disable)
Support port operating mode configuration
Support port flow control
Support Jumbo frame
MAC Address Table and Security
Support MAC address auto learning
Support MAC address aging
Support MAC address statistics
Support MAC address learning/binding
Support MAC address table management
Support port security control, static address table and dynamic MAC address management
VLAN
Support port-based VLAN
Support uplink port (One port can belong to more than one VLAN
Broadcast Storm Control
Support broadcast storm control
QoS
Support IEEE 802.1p priority
Support port-based priority
Support flow statistics on each port
Support real-time display of bandwidth on each port
System Management/Configuration Management
Support Web user interface
Support IP address modification
Support DHCP client
Support switch discover
Support password modification
Support auto log out
Support the limitation of multi-user management at the same time
Support firmware upgrade through HTTP (file-format check)
Support resetting the device to the Factory Default Settings
Specifications
Backplane bandwidth: 48Gbps |
Switch mode: Memory Forwarding Mode |
MAC table size: 8K |
Packet buffer: 4Mb |
Dimensions (H * W * D): 440mm*230mm*44mm (19-inch rack and desktop) |
Port: 24 10/100M/1000M RJ-45 ports |
2 multiplex 1G SFP ports (Combo) |
Reset button: 1 Reset button for resetting the device to the Factory Default Settings |
Serial port: R232 |
Cabling type: 10BASE-T/100Base-TX/1000BASE-T/1000BASE-SX/LX |
Status LEDs: Link/Act, 1000M |
Other LEDs: Power, system |
Operating temperature: 0~40 (Degrees Celsius) |
Operating humidity: 10%~90%, non-condensing |
Storage temperature: -40~70 (Degrees Celsius) |
Storage humidity: 5%~90%, non-condensing |
Power: 40W Max |
Voltage: AC 100-240 V, 50/60Hz |
Standards supported: IEEE802.3ab, IEEE802.3ad, IEEE802.3x, IEEE802.1p |
User interface: WEB UI, CLI |