Welcome to B2BAGE
HW-PSE-1016-1a
HW-PSE-1016-1a

Minimum Order: 0
Quality/Safety Certification: 0.00


HW-PS-1024-2 is a POE Ethernet 10M/100M network switch, support Auto
MDI/MDIX.26-port Ethernet power-sourcing equipment (PSE).

HW-PS-1024-2 is a POE Ethernet 10M/100M network switch, support Auto
MDI/MDIX.17-port Ethernet power-sourcing equipment (PSE). It has a
UPLINK port to connect to non-POE powered network switches or other
Equipments and it has four IEEE802.3af ports, in line with the PSE power
supply network, each port can offer max. 15.4W power. All ports can support
Auto MDI/ MDIX.It offers a simple, economical,high performance solution,
compatible with 100M networks. It is very easy to install, and to operate and
provides flexibility to improve workgroup performances. All the advantages
show that this switch is the best choice to improve the sever efficiency. The
16 PSE ports simultaneously offer data
transmitchannelsandSupplypowerforroutrs, switches, wirelessAPs,
networktelephones, industrial Network terminals, IP cameras and other
equipments. It provides the power Supply to these appliances without the
necessity of separate power cables,Improves the reliability and simplifies the
installation of the Ethernet power System.
 Technical specification
Item Description
Ordering Information (24 PoE 10/100 ports+2 Gigabit Fiber switch)
Network Protocol and
Standards Compatibility
––IEEE 802.3 10BASE-T
––IEEE 802.3u 100BASE-TX
––IEEE 802.3ab 1000BASE-T
––IEEE 802.3z 1000BASE-X
––IEEE 802.3x full-duplex flow control
––IEEE 802.3af (Power over Ethernet)
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Item Description
Power Supply
––Power consumption: 225W maximum
––100-240VAC/50-60-Hz universal input
––PoE budget: 195W.
Network Ports
––24 10/100 Mbps auto sensing ,Fast Ethernet
––2+2 10/100/1000 Mbps auto-sensing
Gigabit Ethernet switching ports,(RJ-45)
––2 Dual Personality SFP slots
LEDs Power, Link/Act, Speed
 Item Description
Administrative Switch
Management
––IEEE 802.1Q static VLAN (128 groups, static)
––IEEE 802.1p Class of Service (CoS)
––Port-based QoS
––DSCP-based QoS
––IEEE802.3ad link aggregation
––IEEE 802.1D Spanning Tree Protocol
––RFC 1213 MIB II
––RFC 1643 Ethernet interface MIB
––RFC 1493 bridge MIB
––RMON group 1, 2, 3, 9
––RFC 2131 DHCP client
––IEEE 802.1x
––Port-based security by locked,MAC addresses
––Storm control for broadcast, multicast
––Port-based ingress and egress rate limiting
––SNTP
––Port mirroring support (many to one)
––Web-based configuration
––Configuration backup/restore
––Password access control
––RADIUS Support
––TACACS+ support
––Firmware upgradeable
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Item Description
Performance
Specifications
––Forwarding modes: Store-and-forward
––Bandwidth: 8.8 Gbps
––Network latency: <20μs for 64-byte frames in store-and-forward
mode for 100 Mbps to 100 Mbps transmission
––Buffer memory: 3MB per system
––Address database size: 8,000 media access control (MAC)
addresses per system
––Addressing: 48-bit MAC address
––Mean time between failures (MTBF):176,000 hours (~20 years)
––Acoustic noise: 49 dB
Electromagnetic Immunity ––EN 55024
Safety ––CE/RoHS
Environmental
Specifications
––Operating temperature: 32° to 104° F (0° to 50° C)
––Storage temperature: -4° to 158° F (-20° to 70° C)
––Operating humidity: 90% maximum,relative humidity,
non-condensing
––Storage humidity: 95% maximum, relative humidity,
non-condensing
Physical Specifications
Dimensions: (w x d x h):440 x 257 x 43 mm
Weight: 3.6 kg
 The following figure shows the front panel . The front panel contains LEDs, RJ-45 jacks, SFP
module bays, and a console port.
PWR (power) Green: Power is supplied, and the switch is operating normally.
Blinking yellow: The switch is performing boot-up diagnostics.
Off: Power is not present.
RPS(redundant
power supply)
• Green: RPS is detected
• Off: RPS is either not present or is not functional.
Max PoE • Yellow: Power supply has reached its maximum load, and no more
powered devices can be attached to the switch.
• Off: More PoE powered devices can be attached to the switch.
10/100M Fast ports:
LINK, SPEED/ACT,
and PoE
LINK • Green: Link in full duplex.
• Yellow: Link in half duplex.
SPEED/ACT (Activity)
• Solid green: Link in 100 Mbps.
• Blinking green: The port is sending or receiving packets at 100 Mbps.
• Solid yellow: A valid 10-Mbps link is established on the port.
• Blinking yellow: The port is sending or receiving packets at 10 Mbps.
PoE
• Solid green: Power is being provided to a powered device through this
port.
10/100/1000M
Combo ports: LINK,
SPEED/ACT, and
1000M/ACT
LINK
• Green: Link in full duplex.
• Yellow: Link in half duplex.
SPEED/ACT (Activity)
• Solid green: Link in 100 Mbps.
• Blinking green: The port is sending or receiving packets at 100 Mbps. •
Solid yellow: A valid 10-Mbps link is established on the port.
• Blinking yellow: The port is sending or receiving packets at 10 Mbps.
1000M/ACT (Activity)
• Solid green: Link in 1,000 Mbps.
• Blinking green: The port is sending or receiving packets at 1000 Mbps.
 Rear Panel
The rear panel has a standard AC power receptacle for the supplied power cord.
 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.