Air Pressure Wine Bottle Opener
1:simple ,easy and fast to open up
2.Convenient to handle
3:make a noise when pull up

Air Pressure Wine Bottle Opener

  Model: SW-CP01&CP01A

Specification

*Material: ABS Plastic+Aluminum(Teflon surface)

*Unit Weight:57g

*Demension: 19*4.8*1.8(cm)

*Packing: 1pc/PE bag, 120pcs/ctn

 The new air pump wine opener is a simple, easy and fast way to open up a bottle of wine with the handle pulling and twisting. Simply slid the needle in ,  just pump a few times and the cork will out.

Cook Pop(Co2injector)-There are several versions of this one as well, but basically it is handl with a long needle which is inserted down through the cork.

How to use

 1.Use the foil cutter to remove the foil cap.

2.Insert the needle into the middle of the bottle and make sure the needle has passed through the entire cork, ensure the protective tube on the wine pump.

3.Press the wine cork to pump air into the bottle by lifting and lowering  corkscrews coat, until the cork slide out of the bottle.(Normally , 4-7 pump per bottle is appropriate)

4.Push the plastic slider of sleeve to make the cork away from the corkscrews needle.

Caution:

1.Don`t use the corkscrew for plastic cork sparking wine.

2.Please keep the corkscrew out of children` reach,cause the needle  and the clipper knife are very sharp.

3.If the bottle is defective, the times of pumping must not over 12 pumps per bottle.