stainless steel panel and brass solenoid valve material
infrared sensor prevent cross-contaminations

Sensor toilet flush valve C-5304

   C-5304: stainless steel panel                  C-5309: zinc alloy panel

Technical parameters:

Power supply: DC6V(4*AA alkaline batteries) or AC

Power consumption in static:  ≤0.5mW(DC)            ≤3W(AC)

Water pressure:0.3-0.6Mpa

Detection zone: 60cm

Dia of inlet pipe: G 1"

Supplied flow rate: ≥1.2(L/S)

Ambient temperature: 1-60°c

Degree of protection by enclosure:  IP56

Features:

1.water-saving: water flows out when you enter the detection zone and stop immediately once you leave, saving water dramatically.

2.hygiene: self-open and close operation, which can prevent you from cross-contaminations.

3.low power consumption: 4*AA alkaline batteries can be used for 2 years based on 200 cycles every day.

4.optional power supply: both AC and battery power are available for your choice.

5.convenient to maintenance: it's build-in flow controller and filter make the maintenance easy.

6.intelligent flush: it will set up suitable flush mode automatically according to different rate.

7.trap seal protection: it will flush automatically every 24 hours, to avoid the odor returning caused by blocks staying in detection zone for long time.

8.insufficient power reminder: if battery power is insufficient, its indicator will remind you to change batteries.

9.suitable places: the product can be widely used in offices, hotels, hospitals, airports, schools, stations and other public places.

More details, visit our website: www.autto.cn