EC110701N2B-HA1 digital encoders
Minimum Order: 0
Quality/Safety Certification: 0.00
RoHS part
ROTARY ENCODER ,shaft encoder,
long rotary life
stable quality, used by SAMSUNG,LG,SONY,THOMSON...
SHAFT ENCODER EC11 series specification | ||||||||||||
1 | ELECTRICAL CHARACTERISTICS | |||||||||||
ITEMS | SPECIFICATION | |||||||||||
1-1 | Power Rating | DC 5V 0.5mA | ||||||||||
1-2 | Insulation Resistance | More then 10MΩ at DC 250V 1 Minute | ||||||||||
1-3 | Withstand Voltage | 1Minute at AC 50V | ||||||||||
1-4 | Sliding Noise | ≤3mS (Test conditions 360°/S ) | ||||||||||
Using the C/R filter circuit is Recommended. | ||||||||||||
1-5 | Resolution | 15 Pulses/360° for each phase. | ||||||||||
Output signal is 1 pulse per 2 detents | ||||||||||||
1-6 | Phase-Difference | T=0.25±0.17 T | ||||||||||
1-7 | Output Signal And Rotational | CCW direction | A Signal | OFF | ||||||||
ON | ||||||||||||
Direction | B Signal | OFF | ||||||||||
ON | ||||||||||||
1-8 | Working Temperature | -10oC~70oC | ||||||||||
1-9 | Storage Temperature | -40oC~85oC | ||||||||||
2 | MECHANICAL CHARACTERISTICS | |||||||||||
2-1 | Total Rotation Angle | 360° | ||||||||||
2-2 | Rotation Torque | 30~200gf.cm Shaft rotatable at -10oC~+5oC-10oC~+5oC | ||||||||||
2-3 | Shaft Push-Pull Strength | 5.1Kgf.cm | ||||||||||
2-4 | Number and position Detent | 30 detents(Step angle:12°±3°) | ||||||||||
2-5 | Shaft play in axial direction | 0.4mm MAX. | ||||||||||
2-6 | Rotational life | 30,000 Cycles Min.at a speed of 600 cycles/H | ||||||||||
2-7 | Resistance to soldering heat | Manual Soldering:Less than 300 and quicker than 3 seconds. | ||||||||||
2-8 | Nut tightening strength | ≥8 .0Kgf.cm | ||||||||||
3 | PUSH-ON SWITCH SPECIFICATIONS | |||||||||||
3-1 | Switch Circuit | Single Pole and Single Throw (push on) | ||||||||||
3-2 | Switch Travel (mm) | 0.5 mm | +0.4 | |||||||||
-0.3 | ||||||||||||
3-3 | Switch Operating Force | 500 gf.cm | +300 | |||||||||
-300 | ||||||||||||
3-4 | Switch Rating Power | DC 5V 10mA (minimum ratings DC 5V 1mA) | ||||||||||
3-5 | Switch Contact Resistance | First period :100mΩ, | ||||||||||
200mΩafter the end of useful life is reached. | ||||||||||||
3-6 | Switch Push Life | 20,000 Cycles . 500cycles/H, Shaft push load 1kg.cm Max. |