1.MATERIAL: SUS 304 (SPECIFICAL REQUEST 316L INSIDE)
2. FAN :EBM GERMAN
3. PRESSURE GUAGE: DYWER
4. ULPA: AAF

DISPENSING BOOTH

IT IS USED TO PERFORM DISPENSING OPERATIONS IN PHARMACEUTICAL INDUSTRIES.THE EQUIPMENTS SERVE AS SAFETY EQUIPMENT TO OPERATOR DOING THE DISPENSING OPERATION.IN DISPENSING BOOTH BIG PACKING OF DANGEROUS CHEMICALS ARE DISPENSED TO SMALL PACKING BY OPERATOR UNDER CLASS 100 ENVIRONMENT AND 10% EXHAUST SYSTEM ADOPTED.DISPENSING UNIT IS ALWAYS A MEGATIVE PRESSURE UNIT AND AIR IS CIRCULATED FROM OUTSIDE TO INSIDE OF THE EQUIPMENT.HENCE DURING DISPENSING OPERATION POWDER IS ALWAYS SUCKED AT PRE FILTER GIVEN AT THE BOTTON OF THE CABINET SO THAT CHENICALS DO NOT AFFECT THE OPERATOR.

DISPENSING BOOTH CONSISTS OF HEPA FILTER,PRE FILTER,EXHAUST FILTER WITH EFFICIENCY OF 99.997% DOWN TO 0.3μm AT RATED AIR FLOW AND PRESSURE DROP,VELOCITY OF  0.45M/S  IS ADJUSTED TO GET LAMINAR FLOW IN THE EQUIPMENT.

SYSTEM IS EQUIPPED WITH INBUILT MOTOR BLOWER AND ARE DYNAMICALLY BALANCED FOR LOW NOISE AND VIERATIONS,WITH PRE FILTER AT SUCTION,10% AIR IS DISCHARGED THROUGH EXHAUST FILTER TO GENERATE NEGATIVE  PRESSURE  IN  EQUIPMENT.

LOCATION :                  PRODUCTION AREA

OVER ALL SIZE :         2800*2700*2700mm

WORK AREA  :            2500*2200*2000mm

CLASS REQUIRED:       CLASS-100

REQUIRED VELOCITY:  >0.45m/s

MOTOR:                      Germany  ebm  D4E225-CC01-02

IMPELLER :                 steel

HEPA FILTER             :1220*610*69mm-6pc