polishing alumina powder
for ceramics,refractories and surface treatment
99.0- 99.7%
0.3um -74um,120-800mesh
polishing alumina powder
1.for ceramics,refractories and surface treatment
2. 99.0- 99.7%
3.0.3um -74um,120-800mesh
3.ISO 9001-2000
we are specifically in supplying alumina powder,99.0% -99.8%,0.3-74um,120-800mesh.We have our own factory ,which can
produce60Tons /day.Meanwhile,we have a trade company,can produce
and export alumina powder at the same time.We do alumina about 15 years,
have many fixed clients ,and export to Singapore,Australia,Japan,Malaysia,
and the middle east country.SO wish we can had a chance to work with
each other.Thank you very much for your attation.
This product is featured with white powder, loose massive, easy tocrush, stability
in the high temperature, not dissolve in water. It is difficult to dissolve in acid and
alkaline solution. It is suitable for the production of ceramic slip casting products,
it can also be used for roll membrane, dry-pressed, hot-pressed forming and so
on, the products have the low rate of contraction. The original crystal particles
are 1um-5um.
NX-1, | Al2O3 >=99.7% | 325mesh |
| good active character, suitalbe use in super refractory materials. do polishing |
Na20 <=0.1% | 500mesh |
| ||
SiO2 <=0.05% | 800mesh |
| ||
Fe2o3 <=0.03% | 5mircon |
| ||
V.Density >=3.95g/cm3 | 3mircon |
| ||
alpha-Al2O3 >=95% | 2mircon |
| ||
original size 1um | 1mircon |
| ||
NX-2 | Al2O3 >=99.5% | 325mesh |
| suitable use refractory bricks & super refractory materials do polishing |
Na20 <=0.15% | 500mesh |
| ||
SiO2 <=0.08% | 800mesh |
| ||
Fe2o3 <=0.03% | 5mircon |
| ||
V.Density >=3.94g/cm3 | 3mircon |
| ||
alpha-Al2O3 >=95% | 2mircon |
| ||
original size 1-2um |
|
|