Best choice for flue dust sample
1,Easy to operate and save much time.
2,Widely used in getting sample from emission.
1 Function and features
TH-880F is an integrated system for isokinetic sampling of particulate matter and gas analysis in
ducts or stacks.In the basis of measuring component different measuring setup are necessary.
features:
1.1 high interference ability
1.2 simplicity of operation,
1.3 big memory capacity (can be extended),
1.4 data storage security,
1.5 enquiries convenience,
1.6 sampling accurate,
1.7 timing curves,
1.8 measuring calculation,
1.9 cleaning protection,
2.0 backup recovery,
2.1 data printing,
2.2 error protection,
2.3 maintenance friendly,
2.4 no volt release,
2.5 online function,
2.6 DC-AC double use,
2.7 human body functional appearance
2 Components
TH-880F consists of three separated units: an intelligent control unit, a sampling probe and an
accessory case.
3 Specifications
Item Measuring Range Resolution Accuracy
Dynamic Pressure | (0~2000Pa) | 1Pa | ±1.5% |
Static Pressure | (-30~30)kPa | 0.01kPa | ±2% |
Ambient Pressure | (70~130)kPa | 0.1kPa | ±200Pa |
Pressure before flow meter | (-30~0)kPa | 0.01kPa | ±2% |
Sampling flow | (5~60)L/min (extended to 80L/min) | 0.1L/min |
|
Stack Gas Temperature | (0~500)°C (extended to 800°C) | 1°C | ±3°C |
Dry Temperature | (0~100)°C | 0.1°C | ±1°C |
Wet temperature | (0~100)°C | 0.1°C | ±1°C |
Temperature before flow meter | (-30~150)°C | 0.1°C | ±1°C |
Ambient Temperature | (0~100)°C | 0.1°C | ±1°C |
Humidity | (0~60)% | 0.1% | ±1.5% |
Optional | |||
SO2 | (0~5000)/mg3 * | 1/m3 | ±3% |
NO | (0~2500)mg/m3* | 1mg/m3 | ±3% |
CO | (0~2500)mg/m3 * | 1mg/m3 | ±3% |
NO2 | (0~500)mg/m3* | 1mg/m3 | ±3% |
O2 | (0-25)% | 0.1% | ±2.5% |
CO2 | (0-5)% * | 0.01% | ±3% |
H2S | (0-500)mg/m3 * | 1mg/m3 | ±3%
|
PS: The mark * shows that the gas concentration range can be extended according to the user's requirement.
PS: When the capacity of smoke sampling pump load is equal or greater than 50L/min, the resistance is 20kpa. The capacity of smoke sampling pump load is equal or greater than 0.7L/min, the resistance is 30kpa.
Weight: 15KG Size: 175mm*465mm*415mm(L*W*H)