Detection capability, good linearity, high accuracy, good stability, wide measurement range, operation is extremely convenient
1. Overview
HCC-16 ultrasonic thickness gauge is the same type of products, the introduction of foreign advanced technology developed from. It uses advanced sound velocity increment of the current decline method and dual-chip probe technology, the circuit is highly integrated and digitized.The instrument has a detection capability, good linearity, high accuracy, good stability, wide measurement range, the operation is extremely convenient, to avoid the usual thickness brought about by the time the amplifier temperature drift error of the thickness readings, and can read digital display in the form of the speed of sound device under test.
The material can be spread can be used ultrasonic thickness measurement of the instrument, such as: metals, ceramics, plastics, nylon, glass and so on. The instrument is suitable for petrochemical industry (oil fields, refineries, chemical plants), shipbuilding, automobile manufacturing, power plants, construction, machinery manufacturing and profiles, pressure vessels, boilers, storage tanks, pipes, pipe, slab , forging, shaft, wheel type, flange, hull, deck, rail, machine parts thickness measurement and corrosion measurement.
The instrument measured for pieces of rough surface corrosion, even in the thick scale range, also has strong detection capabilities.
2. Technical Data
2.1 shows
1) the red LED digital tube, three half-figures;
2) Display resolution 0.1 mm;
3) thickness shows the retention time of about 2 s;
4) greater than 99.9mm, the one hundred mark flashing .
2.2 Measurement
1) Thickness Range: 2mm ~ 200mm (45 # steel);
2) indication error: ± (1% H +0.1) mm, (H: thickness of the material under test).
3) Probe frequency: 5MHz;
4) Permissible ambient temperature: 0 °C ~ 40 °C;
5) Velocity Range: 100m / s ~ 9990m / s;
6) Zero calibration block: 5.0mm
7) Power consumption: 0.3W;
8) Auto off: do nothing after boot, about 1 minute automatic shutdown
9) Power supply: 5 V ordinary batteries or nickel cadmium battery
10) Power loss of pressure alarm: when battery voltage falls below 6.2V lowest decimal point flashes.
