This testing instrument is designed and produced to test inclination.

1. Product Introduction

This testing instrument is designed and produced to test inclination. It is widely used in engineering drilling, exploration drilling and directional drilling. Combined with sensor, power supply, data processing system and controlling unite together, it can independently the test dip angle and azimuth angle of borehole and multi-points. This instrument dose not need cable, winch and mechanical moving parts.

2. Technical Parameter

(1)Measurement Depth: less than 1500m.

(2)Measurement Ragne: dip angle:0~50°, azimuth angle: 0~360°.

(3)Measurement Error: When dip angle is at 1~3°, error is at ±5°.

                                     When dip angle is at 3~50°, error is at ±3°.

(4)Power Supply: AC220V±10%, 50HZ.

(5)Delay Time: 1~80 min

(6)Time interval: 1~60 min

(7)Measurement Points: 1~100

(8)Data Storage: 100 groups

(9)Inclinometer Probe: Size is φ40×1320mm.

(10)Ambinent Temperature: 0~55 °C