Celuka rigid pvc foam sheet
1. Size: 1220x2440mm,1560x3050mm,2050x3050mm
2. Density: 0.45-0.9g/cm3
3 Thickness: 1-25mm
-----
Celuka rigid pvc foam sheet
------------------------------
1. Specification and Colors
Thickness mm | Size mm | Density g/cm3 |
1-10 | 1220x2440/1560x3050/2050x3050 | 0.45-0.9 |
12-25mm | 1220x2440/1580x2440 | 0.45-0.8 |
Colors: white, red, yellow, blue, green, grey, black,etc
----------------------------------
2. Features
1) Light weight but strong, fire retardant and self-extinguishing, thermal insulation, soundproof and sound absorption, mould proofing ,Damp proof, Waterproof, shockproof, Color weatherproof
2) Non-corrosive, alkali & acid resistance. Non-toxic and chemical resistant. Immune to attack
from insects or vermin
3) Tough, rigid with high impact strength. Long performance life
4) Non-warping and stain proof
5) Easy to clean and maintain.
6) Environmental friendly
------------------------------
3. Application
1) Advertising : sign board, billboard,displays, exhibition stand, silk screen printing, laser engraving material, photograph backing, etc.
2) Construction : kitchen & bath cabinet board ,partitions, wall cladding, paneling,construction wall indoor or outdoor decoration, false ceilings, home and office furniture,shop counter, etc.
3) Others: chemical industry antiseptic project, heat moulding, refrigerator sheet, special freezing project, environmental friendly engineering, control cabinets and panels, structures for corrosive and moisture environments, internal decoration of ship, plane, bus, train, roof wing-room or others, compartment core layers etc.
------------------------------
4. Property
The physical data given in the table were determined on the test specimens under defined conditions and represent averages values from a relatively large number of measurements. The values measured on test specimens can’t be used without restriction for a prediction of the properties of finished articles, since processing and shaping have an influence on the properties.
------------------------------
5. Processing:
You can perform with usual wood and metal equipments and tools :
Deeping drawing Milling
Drilling Varnishing
Bolting Lacquering
Welding Thermoforming
Embossing Printing
Punching Flocking
Riveting Engraving
Backing,laminating Water-jet cutting
Coating Sawing
Nailing Glueing
Die-cutting Cutting
Screwing
------------------------------
6. Proper handling and storage:
1) Lift Boards: Always lift boards off the board below, never slide or drag.
2) Handling Vertically: Always carry the boards on edge.
3) Storage: Boards should be stored with cover on a flat base. If stored in the open area the stack should be fully protected from external environment.
------------------------------
7. Package
