gas valve
1. WP: 20MPa
2. DN: 6mm
3. Inlet & outlet thread:W28.8X1/14;M12X1-INT
4. Safety Device30+3MPa/110+-10
gas valve
Type | WP | DN | medium | outlet thread | inlet thread | safety device |
CYT-1C | 20MPa | 6mm | cng | M12X1-INT | W28.8X1/14 | 30+3MPa/110+/-10°C |
General
Our products have passed international identification in accordance with ISO 15500(international standard on Road vehicles-Compressed natural gas (CNG) fuel system components.) This operating instruction manual is applicable to compressed natural gas valves and filling valves to be fitted to vehicles. The valve's service pressure shall be 20MPa or 25MPa and service temperature shall be between -40°C ~+85°C
Notes
1. Properly installation to ensure a good seal connection. After a whole system having been connected,a leakage test should be done. If failure occurs, adequate tightness should be performed after decompression.
2. Open slowly when start the valve. Close the valve when the working is finished. Don't open or close it quickly.
3. Do perildic checks often for operating devices. Valves' maintenance and parts replacement should be performed by professional cylinder inspection unit, vehicle modification unit or contact with our after-sale service department. Don't attempt maintenance and replacement them without permission. Don't replace our company's original parts by any other ones.
4. Refilling cylinder shall be complied with related standards and the vehicle should be turned off power, no speeding, no over-pressure, no over temperature.
5. Installation should avoid the erosion of damp condition and corrosive gas.
6. Valve should avoid moisture, heat and corrosion effects, and be strictly prohibited by falling, collision and other external damage during the circulation and use.
Certificate: ISO15500( Other valves we are trying to get ECE r110, ISO10297 certificate)
other series cng valves pls see below:
CNG filling charge series valve
ISO1500 certificate CNG Valve safety device alloy plug and burst disc
ISO1500 certificate CNG Valve
ISO1500 handwheel CNG gas Valve