Pls see follow specification.
INSTRUCTIONS FOR SETTING PASSWORD LOCK:
1) With case towards you, push release button to (open) postion and (hold) open until
step (2) is completed.
2) Turn the combination lock gear to the desired (code) you will remember, make a note
off pass-code, you can now release the button in step (1). Now repeat to check it.
*do the same for the other side lock. repeat and test. locks should now be set.
NOTE:
1) This series of case and bags when not in use should be 'switched off' to avoid undue
battery drain. With normal use, the battery should be charged every 3 days.
When not used regularly, the battery should be charged at least once a month.
2) Remote control uses (2) types of batteries, 1. moblile phone type battery (A123) 12v.
for A,B,C buttons operation, this battery generally lasts approx: 1yr. if the operating
distance is found to be significantly shorter, replace battery immediately.
The 3.6v rechargable battery operates the C button, this is the 'anti-loss' launch of the
radio band coding, *if you slide the the front cover of remote upward, an alarm sound
from the ring on 3.6v battery sounds, the battery is exhausted and should be recharged.
3) Owners, do not work on more than one unit at a time! you can damage the components
of the 'host' unit and 'remote' control which will affect the sensitivity of the launch.
4) Due to the use of encoding and decoding of the remote control, the 'host' unit must be
launched repeatedly for detection of decoding and encoding signals to output the right
signals. Therefore, press the key-button for more than 1 second.
MAINTENANCE:
*Units come with life-long warranty, other parts are coverered for one year. Should there be
any ammendments, modifications or alterations to units, these are not within the scope of
the warranty.