single component UV cured resin,good photics transparence.no need to mix when use,no need to get rid of bubble

5833 UV cured resin
[Description & usage]
5833 is single component UV cured resin,good photics transparence.no need to mix when use,no need to get rid of bubble vacuum,no need to remove bubble handle.easy and simple to operate,solidify quickly,can improve production capacity greatly.with good viscosity and liquidity.the final product is sparkling and crystal- clear,smoothness and brightness,full of decorative,can greatly improve the base material’s third dimension,improve the level,has good viscous force to ceramics/metal/hard plastic and etc.
[Main Parameter]
Appearance                             transparent viscous liquid
Viscosity(mPa.s,25°C)                   240   
Solidify speed(min,250W UV light)    2 - 5
Refraction rate nD25                  1.51
[Application]

Can be applied to cover light on photo label,nameplate crystal doming and etc.
[Method]
Solidify with UV lamp
Solidify term recommended:250W UV lamp,about 3 minutes

the more intensity of UV lamp,the shorter time of solidify.
[Package/store/transportation]
Packed in plastic barrel,can store 6 months in indoor normal temperature,can be 12 months in 5°C.
[Notice]

a. be avoided from heat or light when store and transportation.

b. the resin has some smell,pay attention to aeration when operation

c.the resin is partly stimulation to skin,operate carefully,don’t touch skin.

d.If resin left on skin,wipe off with paper towel,then clean with suds,then flush with clean water.
 

5832 UV cured resin
[Description & usage]
5832 is single component photosensitive resin,good photics transparence.the final product is sparkling and crystal-clear,smoothness and brightness,like mirror,good weatherability,will not turn yellow. has good viscous force to ceramics/metal/hard plastic and etc.has good viscous force to ceramics/metal/hard plastic and etc.
can solidify within seconds under 300-400nm UV light.
[Main parameter]
Appearance             straw yellow transparent viscous liquid
Viscosity(mPa.s,25°C)                        6000-8000
Position-setting time(s/250W UV light)         15-30
Solidify time(s/250W UV light)                 120
Condensate rigidity(D)                         80

[Usage]
Can be applied to cover light on chinaware/glass craftwork/nameplate crystal dome and etc.also can be applied to electronic’s fast position-setting.

[Method]
solidify term recommended:1000W UV lamp,about 10 seconds.if under summer sunlight,about 1-2 minutes.

[Package/Store/Transportaion]
Packed in plastic barrel,can store 6 months in indoor normal temperature,can be 12 months in 5°C.

We also supply all kinds of UV lamp and  UV bulb