1.imidazoline is the corrosion ingredient
2.corrosion rate is higher than 90%
Corrosion Inhibitor Intermediate;Intermediate
1, Introduction
Normally, imidazoline is the corrosion ingredient of corrosion inhibitor, while we use bis-imidazoline as corrosion ingredients. There are two pairs of imidazoline molecule pentacyclic group and two adsorption groups in bis-inidazoline, so its adsorption is higher the imidazoline.
2, Technique sheet
Items | Index |
Appearance | Yellow to red-brown liquid |
PH value | 9.0-11.0 |
Active ingredient(%) | ≥55 |
Solubility | Miscible with water |
Density(g/cm3) | 1.00-1.15 |
3, Method and Use
a. Mix it with water according to 3:7 ratios,you can get corrosion inhibitor products.
b. Suitable for antisepsis of waste water reinjection equipment in oil recovery plant and atmospheric pressure, catalytic equipment in refinery.
c. Reference dosage 30-50ppm. Its inhibition rate is higher than 85%, corrosion rate is lower than 0.05mm / a. Add 30ppm in refinery, the iron ions can be reduced to below 2ppm.
4, Packing and storage
a. Net weight 200KG / plastic drum.
b. Valid for one year.
