1, 4 wire resistive usb controller;
2, Support ELO drive and 3M driver
3, Support windows,liunx,mac etc os
Model | 4030U |
Construction | Four-layer surface-mount design with internal ground plane for EMI suppression. |
Dimensions | Total width: 0.79 inches (20 mm), including connectors |
Total length: 3 inches (76 mm) | |
Total height: 0.47 inches (11.8 mm) | |
Supply Voltage | +5 VDC, nominal (+4.75 to +5.25V DC), and Current 50mA typical, 240mA maximum at +5 VDC. |
Typical power dissipation is 500mW at 5V. Minimum power-supply 400 mA | |
USB Interface | Interrupt-type, full-speed USB device. |
Operating Modes | Leadingtouch protocol |
Customer specific protocol | |
Initial/ Stream/ Untouch Modes | |
Touch Resolution | 4096x4096, size independent |
Conversion Time | Approximately 10 ms per coordinate set |
Reliability | MTBF greater than 1,543,000 hours per MIL-HDBK-217-F2 |
Temperature | Operating: 0°C to 65°C; Storage: -25°C to 85°C |
Humidity | Operating: 10% to 90% RH, noncondensing; Storage: 10% to 90% RH, noncondensing |
Operating Altitude | 10,000 feet |
Shock and Vibration | With Leadingtouch standard container, meet International Safe Transit Association project 2A test procedure. |
ESD: | Per EN 6100-4-2 1995. Level 4, Contact Discharge - 8kV ; Air Discharge - 15kV positive and negative polarity |
Flammability | 94V0 |
LED Indicators | The 4030U controller has one LED status indicators. When 4030U controller initially connects to host, the LED will be constantly on. When touchscreen connects to 4030U, the LED will snuff out after 3 seconds and be constantly on during touch. |
Agency Approvals | The touch system including 4030U controller, touchscreen and connection cable has certified with FCC Part 15. The touch system including 4030U controller, touchscreen and connection cable is compatible with EN55022 and EN55024 standards and is certified with CE |