2010-2011 Mini PCI-E 5 in 1 diagnose card/Mini PCI-E 5 in 1 test card
1) Support MiniPCIe
2) Support MiniPCI
3) Support LPC
2010-2011 Mini PCI-E 5 in 1 diagnose card/Mini PCI-E 5 in 1 test card
1) Support MiniPCIe
2) Support MiniPCI
3) Support LPC
4) Support ELPC (Dedicated for ASUS Notebook)
5) Support I2C (Dedicated for IBM/Lenovo Notebook),Can be connected to notebook battery interface via cable
Observing the Three in One Laptop Notebook Diagnostic Card is a diagnostic card (VIP) upgrade to support the notebook computer MiniPCIe, MiniPCI, LPC, ELPC and laptop battery I2C interface bus architecture. The four-layer PCB used laptop diagnostic card design, signal stability, good compatibility, easy to use, is an essential tool for laptop repair.
Mini PCI-E is a laptop motherboard is gradually using the new interface. Comparison of the Mini PCI Interface, Mini PCI-E interface to take up less space. The diagnostic card Mini PCI-E interface, the following pin: PIN-8, PIN-10, PIN-12, PIN-14, PIN-16, PIN-17, PIN-19. At present, because not all laptop manufacturers support the standard definition of the pin, so not all notebook motherboards now support the interface. After testing, the latest Lenovo, HP, Fujitsu, Toshiba, Divine, Acer, Inventec, Quanta and other laptop motherboard can support the interface. The laptop does not support the interface board, the interface will not work properly. Here are some of the user's test results, only as a reference.
HP: V6000 series, including CT6 other models; V9000 series, including AT8, AT9, and other models
Lenovo: CW3, CW4, LE4, LE5, and other models
Divine: 310,320 other models
Purple: SYMPHONY6.0, 7.0 and other models
Acer: Most models
Fujitsu: PROTLAND10 other models
British industry: the majority of OEM Toshiba and HP models
Most models OEM Quanta
Other. . .
LPC is widely used interface to the motherboard. Diagnostic definition of the interface on the card are: from left to right, followed by PIN1-LFRAME #, PIN2-LAD3, PIN3-LAD2, PIN4-LAD1, PIN5-LAD0, PIN6-GND, PIN7-LRESET #, PIN8-LCLK , PIN9-3.3V.
The use of the interface need to use the fly line. Lenovo's ThinkPad series of notebook computers to keep most of the board of the fly line interface.
For IBM X60 notebook motherboard, LPC interface has been retained in the serial number for the U39
The slot. It is defined as: A2-> LRESET #, A3-> LFRAME #, A5-> LCLK, A9-> LAD3, A10-> LAD2, A11-> LAD1, A12-> LAD0
For IBM T6 R6 board, LPC interface has been retained in the pin number for the J26
On. It is defined as: A1-> LCLK, A3-> LFRAME #, B2-> LRESET #, B7-> LAD3, A7-> LAD2, B6-> LAD1, A6-> LAD0
For the no fly line interface to retain the laptop motherboard, you need to fly line connection to the motherboard pins on the chip used, which requires users to have good welding skills. Below are some common chips fly line methods, such as PC97551, PC87541, PC87591, H8S/2149, W83L950D, TCPA and so on.
Power and ground are not listed in the figure above. Users can use any motherboard GND and 3.3V power supply. (Note: Do not connect the diagnostic card PIN9-3.3V to 3.3V power source of non-. Because of the diagnostic card 3.3V power supply, not the correct power connector permanently damage the diagnostic card.)
prefix = v ns = "urn: schemas-microsoft-com: vml" prefix = w ns = "urn: schemas-microsoft-com: office: word" Also, if the motherboard using the LPC interface PLCC32 the BIOS, users can also fly line to connect the diagnosis of the interface card to the motherboard's BIOS with LPC. LPC BIOS pins is defined as:
PIN2-RST #, PIN13-LAD0, PIN14-LAD1, PIN15-LAD2, PIN16-GND, PIN17-LAD3, PIN23-LFRAME #, PIN25-VCC, PIN31-CLK.
