Rotate-clamping module
Spin-Clutch Module
Cross-Connector Module
Straight splicing module
LSA IDC module
Key Specifications Special Features:
25 pair Rotate-clamping module, Used for the connection and disposition between telephone network cable trunk and telephone distribution
1.Environment condition: -20-40 degree Celsius ;Relative humidity <85% (30 degree Celsius) Atmospheric pressure: 70-106KPa
2.Pulling-out force: phosphor bronze and silver plating (20-40 uinch), pulling-out force not less than 25N
3.The performance of anti-burn: anti-burn ABS (UL94V-0),Combustibility achieved GB/T 5169.7-1985 standard
4.Insulated resistance: under standard atmospheric pressure ,Insulated resistance no less than 1,000M ohm between the two disjunct connections
5.Intermediate resistance between the reed terminators: no more than 7m ohm between intermediate reed under the standard examination condition
6.Intermediate resistance: no more than 3m ohm under standard examination condition
7.Dielectric strength: according to industry standard
8.times of use :connection column >200times, pipe cap:>50 times
9.Connecting and cutting off unnecessary wires by using screw-driver to rotate 90°clockwise in plastic cap slot.
10.Each connection splice is applied with dampproof and anti-oxidization protection preparation
11.Two colors of blue and green are available
Rotate-clamping module
Spin-Clutch Module
Cross-Connector Module
Straight splicing module
LSA IDC module
ANSHI Spin-Clutch (Cross-Connector) Module
Rotate-clamping moduleSpin-Clutch Module
Cross-Connector Module
Straight splicing module
LSA IDC module