V.35 over E1 converter
10Base-T to E1 Protocol Converter
E1/BNC 75OHM/RJ45 120OHM optional

V.35/10Base-T to E1 Protocol Converter

GVE-Tplus Series gives the interface conversion between G.703 E1 and V.35.This device provides an economical digital access solution foe E1 and Fractional E1 network services.With a adapter cable, the Device can link to other DTE Device,such as router,at data rates of 64Kbps to 2048Kbps.User data is placed into the E1 frame,using only the required number of timeslots.Timeslot assignment is accomplished according to the Data Port speed and manual setting of DIP switches.GVE-Tplus Series is widely used in communication network,both in WAN and LAN connection field.

Features

*Interface conversion between E1 and V.35,E1 and Ethernet

*Support ITU-T V.35, G.703, G.704, G.823

*Fully compatible with IEEE 802.3 and Ethernet Standards

*Standalone and chassis module available,support hot-swap

*Framed(N*64Kbps) and unframed(2.048Mbps) optional,support continuous and discontinuous timeslots setting

*Ethernet port 10Mbps, Full/Half Duplex mode compatible

*10Base-T LAN Interface on RJ-45 connector and MDI/MDI-X auto-crossover

*Frame mode support PCM30/PCM31

*CRC/non-CRC auto-negotiation on E1 interface

*Support remote bandwidth control,and remote loop back under framed mode

*Support intenal clock,E1 recovery clock or V.35 line clock

*Provide local,diagnostic and remote loop back test

*For E1 interface,75ohm(unbalanced) and 120ohm(balanced) available and auto-negotiation

*For V.35 interface,DCE and DTE mode are optional