1.CE steel bar cutting machine
2.Cutting capacity:4-55mm
3.Less power loss
4.High efficiency& long life cutting machine
Rebar Cutting Machine GQ55D | |
The Max. diameter of cutting off steel bar | φ55mm (tensile strength σb ≤ 450MPa) |
The Max. size of cutting off flat steel | 70 × 15mm |
The Max. size of cutting off square steel | (Q235A) 32 × 32mm |
Continuous cutting off number | 48 times / min |
Model of the motor | Y2100L-2 |
Power of the Motor | 3.0kW |
Motor speed | 2880 r / min |
Whole weight | 510kg |
Overall dimension | 1100 × 500 × 1050mm |
Advantages of the products
The casing is made by ductile cast iron, and the inside gear, gear shaft, and connecting rod were made by high quality structural steel or alloy steel.
The important parts of the machine under gone hardness treatment.
The heavy fly wheel can ensure the strength of cutting, as well as deduce the impact load of the machine.
The adoption of the large gear can improve the driven speed as well as the working life.
The high cutting speed with simplified system enjoys 50% faster than normal cutters.
The longitudinal direction hand/feet operated way satisfies the human-machine engineer principle and enables a simple operation.
Worry-saving: The main components can last for ten years which almost cost you nothing for maintenance.
Time-saving: Two times the cutting number of the normal steel bar cutter.
Labor-saving: Cut different sizes of steel bar without changing the knife.
The adoption of totally steel made gear, integral connecting rod, and heat treatment and hardness treatment of the important parts of the machine together guarantee a long working time.
The thread type and adjustable stop gauge ensure the accuracy and immobility of positioning.
The separation of connecting rod and gear enable the machine undertake a reasonable stress. The connecting rod and gear can be disassembled separately which is convenient for maintenance.
The large cutting stroke ensures all standards of steel bar can be cut without changing the cutting blade.
Seriate cutting speed is 50times/min which improves 50% efficiency than normal cutters.
